* Patients within the age group of 4-10years. Badly decayed or multi-surface affected primary teeth Healthy children free of any systemic disease Patients with cooperative behavior rating definitely positive or positive on the Frank rating scale
Exclusion Criteria:
* Teeth with developmental disturbances
* Teeth with poor prognosis as signs of necrosis, extensive pathological root resorption
* patients with parafunctional habits
Source : Importé depuis le centre
Cohortes
Thérapie ou Intervention proposée
Cohortes
Nom
Condition médicale
Traitement
État du recrutement
Digital crowns
Crowns that are fabricated digitally by mean of CAD-CAM technology will be placed after preparation.
Tooth preparation will include 1.5-2 mm. occlusal reduction and proximal contacts will be opened and the entire clinical crown structure will be reduced by 0.8-1.0 mm.and the preparation will be finished with a subgingival finish line.
Upper and lower arches will be scanned with an intra oral scanner. A third scan of the occlusal bite is then performed in order to establish the patient's occlusion.
Brilliant Crios composite blocks will be milled with the CEREC MC X milling unit and the inner surface of the crown will be sandblasted followed by etching with 5% hydrofluoric acid for 60 seconds.
Donnée non disponible
Inconnu
Zirconia crowns
Prefabricated zirconia crowns that are ready made and supplied in kits with their try-ins will be used in this arm.
Occlusal reduction of 1.5-2 mm. will be performed by a football diamond bur. The whole crown will be reduced by 0.8-1.0 mm by means of a tapered diamond stone. A shoulder finish line will be created. The try in crown will be tested. Then the shoulder finish line will be removed and the preparation will be extended subgingivally to a feather-edge.
Donnée non disponible
Inconnu
Digital crowns
État du recrutement
unknown
Crowns that are fabricated digitally by mean of CAD-CAM technology will be placed after preparation.
Tooth preparation will include 1.5-2 mm. occlusal reduction and proximal contacts will be opened and the entire clinical crown structure will be reduced by 0.8-1.0 mm.and the preparation will be finished with a subgingival finish line.
Upper and lower arches will be scanned with an intra oral scanner. A third scan of the occlusal bite is then performed in order to establish the patient's occlusion.
Brilliant Crios composite blocks will be milled with the CEREC MC X milling unit and the inner surface of the crown will be sandblasted followed by etching with 5% hydrofluoric acid for 60 seconds.
Zirconia crowns
État du recrutement
unknown
Prefabricated zirconia crowns that are ready made and supplied in kits with their try-ins will be used in this arm.
Occlusal reduction of 1.5-2 mm. will be performed by a football diamond bur. The whole crown will be reduced by 0.8-1.0 mm by means of a tapered diamond stone. A shoulder finish line will be created. The try in crown will be tested. Then the shoulder finish line will be removed and the preparation will be extended subgingivally to a feather-edge.
Données à jour depuis :
30 mai 2024
Description de l'étude
Description de l'étude
Résumé de l'étude
Badly decayed primary molars will be treated by performing the pulp therapy technique indicated, then the patients will be randomized into two groups to receive the restorative intervention. For the intervention group, teeth will be prepared to receive the digital crown after intraoral scanning while for the control group, teeth will be prepared to receive the prefabricated zirconia crowns. Teeth will be followed up clinically for 1 year, at 1, 6 and 12 months.
Source : Importé depuis le centre
This is a 12-month randomized, controlled, two parallel arms clinical trial. Patients aging from 4 to 10 years with multi-surface decay will be selected. After caries removal and pulp exposure, pulpotomy or partial pulpectomy technique will be performed,then the teeth will be randomized to the interventional group of digital crowns or to the control group of prefabricated zirconia crowns. For preparation of digital crowns, the occlusal reduction was done by 1.5-2 mm. The proximal contacts will be broken and the entire clinical crown structure was reduced by 0.8-1.0 mm , followed by a a subgingival finish line . For the scanning procedure, the upper and lower arches will be scanned with intra oral scanner, and making sure every point is well detailed . A third scan of the occlusal bite is then performed in order to establish the patient's occlusion.
For the milling procedure, Brilliant Crios composite the blocks will be used and milled with the CEREC MC X milling unit . The inner surface of the crown will be sandblasted with Al2O3 .
For zirconia crown preparation, occlusal reduction of 1.5-2mm will be performed by a football diamond bur. The occlusal third of the buccal and lingual surfaces will be also reduced . The whole crown will be reduced by 0.8-1.0 mm by means of a tapered diamond stone .A shoulder finish line will be created. The try in crown will be tested, then the shoulder finish line will be removed and the preparation will be extended subgingivally to feather-edge.
The crowns will then be cemented with the self-adhesive resin cement (Solocem, Coltene, Whaledent, Altstatten, Switzerland) .Light curing was performed while applying pressure on the crown and then waiting for 5 minutes for complete cementing
Source : Importé depuis le centre
Centres participants
Sites
Centres participants
1
centres
NATIONAL RESEARCH CENTRE
Cairo
EGYPT
Recrutement local
État du recrutement:
FERMÉ
Source d'information
Dernière modification :
30 mai 2024
Données à jour depuis :
2 juin
Origine des données :
clinicaltrials.gov
